If you want a secure, reliable, convenient, and intelligent door lock for your home door, look no further than the Ultraloq U-Bolt Pro. The Ultraloq U-Bolt Pro is one of the best smart locks on the market. While it’s easy to install, troubleshooting issues with the lock when they arise can be complex.
Troubleshooting is a common problem of Ultraloq UL3 U-Bolt Pro. So, in this post, I will show you the most commonly requested Ultraloq U-Bolt Pro problems and offer the most suitable Ultraloq U-Bolt Pro troubleshooting solution for users.
What is Ultraloq U-Bolt Pro lock?
Ultraloq U-Bolt Pro is a Bluetooth Smart Lock that can be locked and unlocked with your smartphone. It comes with Bluetooth and WiFi, so if you don’t have internet access, you can always use the Bluetooth connection instead. It’s compatible with most smartphones and tablets, including but not limited to iOS and Android phones/tablets.
Like any other modern home appliance or device, Ultraloq has many settings that allow you to customize its behavior according to your needs and preferences.
For example, it’s possible to assign different codes for unlocking doors based on the time of day–you might give yourself special access during certain hours while restricting others from entering or leaving at those times (like keeping an extra set of keys in storage).
Why is Ultraloq U-Bolt Pro lock popular?
Ultraloq U-Bolt lock is the best-selling product of Ultraloq because it is:
- Easy to use. The Ultraloq features an easy-to-use one-button operation, so you don’t need to remember special codes or combinations when securing your door.
- Long-lasting battery life. The Ultraloq comes with four AA Alkaline Batteries that last a long time without replacing, sometimes as long as two or three years before needing new batteries! You won’t have to worry about running out of power.
- Durable. It can be used for over three years, saving you money on your purchase.
- Easy to install and manage. As a user, you don’t need to worry about how long it will take or whether you’ll be able to get along with the installation process; follow the simple instructions given by Ultraloq and get started right away!
- Easy to program. You now have access to an app with your phone where you can create codes for every one of your locks!
- The Ultraloq U-Bolt comes with two backup keys, Making it easy to manage your lock system without worrying about losing keys or replacing them when they wear out due to heavy usage.
- The Ultraloq U-Bolt uses Bluetooth technology, so all you have to do is download an app from Google Play Store or Apple Store on your phone, then go through some simple steps before setting up this door access control system at home or office premises!
What are the most common models of Ultraloq U-Bolt Pro?
Ultraloq U-bolt pro
This is the first model of Ultraloq U-bolt pro. It supports fingerprint and Bluetooth. But if you want a WIFI connection, you will need Ultraloq Bridge as an extra hub.
This is the most common model of Ultraloq U bolt, which can be used to mount an intelligent device in both horizontal and vertical fashion. It’s also possible to use it with Alexa and Google Home devices.
Ultraloq U-bolt pro Z-WAVE
Ultraloq U-bolt pro Z-WAVE is an advanced version of Ultraloq U-bolt pro. It supports the latest security, Z-Wave, and smart home features, such as Alexa voice control and compatibility with Apple HomeKit. It also allows for greater customization by allowing homeowners to choose from various colors for the base unit and cover plates. Also, you will need a Z-Wave Hub.
The Ultraloq U-Bolt Pro WiFi
This Ultraloq U-Bolt Pro WiFi has a built-in WiFi chip and allows you to connect your smartphone directly to your door lock system through WiFi. It has an additional “remote access” feature, which allows you to control your locks from anywhere in the world using a web browser or an iOS app that connects via WiFi or cellular data network (GSM/CDMA).
What components does the Ultraloq U-Bolt Pro lock include?
The Ultraloq U-bolt pro lock includes the following components:
- Battery. The battery powers your door locks and allows them to communicate.
- Interior Assembly. This part includes the interior components of your lock, including a motor, solenoid, and battery connector that connects directly to the exterior assembly (see below).
- Exterior Assembly. This part attaches to your door frame or body panel with screws and bolts so that it can be positioned in front of or behind your current keyhole opening on one side of a home door.
- Mounting Plate–The mounting plate is used for the fixed bolt, Interior case, and Exterior case.
- Strike – This part attaches to the door frame and secures the bolt. It’s typically made of metal. The Strike should be installed by a professional locksmith or other qualified people to be adequately secured.
- Bolt – This is what secures your door when it’s locked, preventing anyone from opening it without authorization from you or someone else who uses keys with matching code numbers (such as a family member).
- Door Sensor – The Ultraloq U-bolt lock comes complete with this handy little device that detects whether or not there’s movement outside before engaging its locking mechanism automatically when people start trying to break down doors
Is Ultraloq U-Bolt Pro secure?
Ultraloq U-bolt pro is highly secure. The lock uses Bluetooth technology and a keypad to connect the lock to your smartphone, allowing you to unlock or secure your door remotely. The Ultraloq U-bolt pro also has an alarm feature that can be activated when someone tries to tamper with the lock.
Ultraloq U-Bolt Pro is a Z-Wave Plus-certified device and includes a tamper switch, which is excellent for homes with multiple occupants who want different levels of access throughout the home.
Ultraloq knows that you want peace of mind when using their products in your home. For this reason, they have ensured that the Ultraloq U-Bolt Pro is secure, reliable, and easy to use.
The most common Ultraloq U-bolt pro problems
There are a few issues that you may encounter with the Ultraloq U-bolt Pro lock. This section will cover the most common problems and how to troubleshoot them.
The lock is not unlocking or locking using the App
A problem with your internet connection can cause this, but it is more likely that the unlock code has been entered incorrectly.
- Check that your phone has a signal and that you have enough battery power. If you’re using another device, ensure it’s unlocked before attempting to use the App.
- Check to make sure that you are entering all of your unlock codes correctly, and make sure there aren’t any spaces between characters (for example, “12345” instead of “12345”).
- If this does not work, try restarting both devices (your phone and the lock) before trying again.
- Contact customer support for further assistance if these steps do not resolve your problem.
Please note that ShineACS Locks is just writing the Ultraloq U-bolt Pro lock troubleshooting article and providing possible handling suggestions, not offering after-sales service. If you can’t finally solve your problem with our article content, please get in touch with the Official aftermarket.
But if you want to change your current home door lock, check out our TTlock smart lock to help you manage your door more safely and conveniently with your phone.
Ultraloq U-Bolt Pro fingerprint stopped working.
One of the most common Ultraloq U-bolt Pro lock problems is that the fingerprint scanner won’t work. Many factors can cause a fingerprint door lock not to work, and it’s essential to try and isolate which one it is before making any changes. If you’re having trouble with your fingerprint reader, here are some things to consider:
- Is there dust or dirt on the scanner? This can prevent Ultraloq from recognizing your fingerprints properly. Try cleaning off the scanner with a soft cloth or spray, then try again.
- Are there any cuts or scrapes on your skin? Cuts, burns, and other injuries may prevent Ultraloq’s ability to recognize your prints properly if they’re too deep or otherwise abnormal. Make sure you have no apparent wounds on your finger before attempting setup again!
- Ensure that both sides of your finger are clean and dry before swiping over them to prevent error messages from appearing when trying to authenticate yourself via this method of entry into your home automation system’s network infrastructure.
- Did someone else try using their fingers before yours? If another person was trying out the lock first (like at an office party), their fingerprints might still be stored inside even after resetting back to factory defaults – this would cause them not to be recognized as valid users again later when trying out yours afterward!
The Ultraloq U-Bolt Pro lock is jammed.
If your Ultraloq U-Bolt Pro lock is jammed or the U-tec App shows the “Deadbolt is jammed” error, there are a few things you can try before contacting our support team:
- Check the depth of the frame’s hole. If it is too deep for your door, use a hammer and chisel to make it deeper. Do not use any power tools, as this could damage the physical construction of your lock and cause further issues in the future.
- Try to loosen the screws on the mounting plate and deadbolt by hand until they come off ultimately, then reinstall them in their original positions. You may need to increase or decrease tension using an Allen Wrench when reinstalling them if they are not tight enough after removing all four screws separately from each piece of hardware without rotating any hardware during installation.
- Also, check for any debris lodged in your lock’s bolt hole.
- Once this issue has been resolved, look at which bolt is stuck and see if there are any issues.
- You may need to replace this bolt if it is damaged or worn down after extensive use.
Ultraloq U-bolt Pro lock connection failed.
If you are having issues connecting your device to the App, ensure that you have downloaded and installed the latest version of the U-tec app.
- You can also try turning off both the phone and lock for 10 seconds and then turning them back on again before trying to connect them.
- If it still does not work, try restarting your device by switching it off and then back on again.
- Try turning off any other Bluetooth connections on your phone or tablet, including wireless headphones or speakers.
- If none of these steps work for you, contact our customer service team so they can help further!
The Ultraloq U-Bolt Pro keypad stopped working.
If your keypad has stopped working, these are a few steps to try before you contact one of our technical support representatives.
- The batteries. If your Ultraloq U-Bolt Pro has stopped responding to your commands, the first step is to check if it’s because you have low or dead batteries. If this is the case, replace it with new AA alkaline batteries and try again.
- Out of range. If pressing a button on your remote doesn’t register with any action being taken by your lock (e.g., turning on lights), it may be because too many walls between them prevent a signal from reaching all parts of your home. Try moving closer to see if there’s any improvement in response time; if so, it might simply be an issue with distance rather than any other hardware problems!
- Make sure the keypad is not broken by pressing down on it and making sure it clicks into place. If the keypad still isn’t working, move on to step two.
This can happen if the Bluetooth isn’t connecting correctly.
- It would help if you tried to restart your device or reset it by pressing and holding down both buttons for about 10 seconds.
- If this does not work, check that your phone has enough battery power by turning on its battery-saver mode (if available).
- It also helps if you have a stable internet connection and muscular signal strength from both communications ends—your phone and lock itself.
Ultraloq U-Bolt Pro is not working correctly.
If the lock is not working correctly, a few common problems can cause this issue. Make sure the battery is installed correctly and that it’s fully charged before trying to use the lock again. If you’re still having trouble with your Ultraloq U-Bolt Pro, try checking these things:
- Make sure your doorknob is fastened tightly and not crooked in any way. The device must be securely fastened to the door to work correctly.
- Ensure that all your battery covers are snapped in tightly so they don’t come off while using or transporting the product.
- Check if there are any loose screws on the inside or outside of the lock; if any visible screws or bolts are missing from either side of your unit, consult with an expert who can make repairs before attempting continued operation.
- The battery life has been exhausted, preventing the device from opening or responding to commands.
- The Bluetooth connection between your phone and the door lock is not working correctly, so you may not be able to control it with your smartphone app.
The lock will not Auto Lock after the door is closed
If the lock will not auto-lock after the door is closed, please check whether you have the following troubleshooting steps.
- The first thing to check is your door sensor. This sensor should be in place and adjusted correctly. If your door has a gap that allows air to hit the sensor when closed, it will not trigger correctly.
- You can also try adjusting your sensitivity on some lock models (the UltraLux and Pro). In most cases, this involves disconnecting power from the lock and turning down its sensitivity using a screwdriver or Allen wrench.
- Check the battery. Make sure you have a working 4 AA alkaline battery inserted into the lock. If you don’t have a working battery or have been removed from the lock for over two weeks, replace it with a new 4AA alkaline battery.
- Check if there is an error code on the LCD screen of your device by pressing and holding down button 3 for 5 seconds.
- Check if there is an error code in your App by going to Settings > U-Bolt Pro > Reset Device Information and then unlocking/unlocking your device using pin code 0000 (four zeroes)
Ultraloq UL3 troubleshooting
If you are having trouble unlocking or locking the lock using the App and keypad, you can troubleshoot the Ultraloq UL3 keypad lock by following these steps:
- Make sure you’re using the correct code on your UL3.
- Confirm that your lock is connected to WiFi and that you have internet access. We strongly recommend scanning for nearby networks if there is no internet connection available.
- Try turning off and restarting your phone.
- Check for any moisture or dust obstructing the sensor bar. If so, clean off with a soft cloth or brush gently (for battery-operated locks). Check if it unlocks now (for battery-operated locks)
- Verify that there is power to the lock. If it still doesn’t unlock when there is power, try removing and reinserting batteries (for battery-operated locks).
- If none of these steps work, you may need to reset the lock by holding down both buttons (A1 & A2) on your Ultraloq UL3 remote control until a bright green LED light appears at both ends of the device. This will take between 3-5 seconds.
- Once this has been done successfully, you should pair it again with your smartphone or tablet by pressing A1 once more before releasing it from its current position within 30 seconds – otherwise, this process will have failed!
Ultraloq U-Bolt Pro customer service
You can try to contact the Ultraloq support team to solve your Ultraloq U-Bolt Pro problems:
- Ultraloq online support center: https://support.u-tec.com/hc/en-us
- For specific help with Ultraloq U-Bolt Pro, please visit https://support.u-tec.com/hc/en-us/categories/360002997492?product=U-Bolt-Pro.
- You can contact them by calling on their toll-free number: 1-844-HEY-UTEC
Ultraloq U-Bolt Pro reset
If you still have problems and can not solve them, trying to reset your Ultraloq U-Bolt Pro lock is a better way.
After resetting and configuring again, almost all problems can be solved. Here is Ultraloq U-Bolt Pro reset steps:
- Open U-tec App as Owner,
- Click “Delete and Reset” to remove the lock from your U-tec Account,
- then use a Reset Needle to push the Reset Button (at the bottom of Interior Assembly) for around 3 seconds until you hear one long beep and two short beeps.
For more Ultraloq locks resetting, please check this article: How to reset an Ultraloq keypad door lock?
Ultraloq U-Bolt Pro manual
Here are some Ultraloq U-Bolt Pro smart lock manuals for your reference if you have troubles with Ultraloq U-Bolt Pro locks:
Ultraloq U-Bolt Pro app
To install the Ultraloq U-Bolt Pro app on your Android, follow these steps:
- Search “U-tec” in App Store (iOS) and Google Play (Android).
- Open the App, register a U-tec account and log in to the account.
- Make sure the lock is in Factory Default Mode.
- Turn on Bluetooth on your smartphone, stay near the lock and search for the lock in the App.
- Pair the lock in the App and start to use it.
Ultraloq U-Bolt Pro firmware update
Firmware is a piece of software that runs on a device. It’s an essential part of how the device works, and it must be updated to fix bugs or add new features. Here are the updated firmware steps:
- Open the U-tec App, and select the lock you want to update.
- Click the Settings menu (gear icon).
- Scroll to Firmware, then click it.
- Click Upgrade and complete the Upgrade.
Keep your phone near your lock, with the U-tec app open throughout the update. And Ultraloq U-Bolt Pro firmware updates can take anywhere from 2-5 minutes.
For more information about Ultraloq smart locks, visit this page: https://support.u-tec.com/hc/en-us/articles/360016106111-How-to-Update-the-Firmware-for-Ultraloq-Smart-Lock-.
I hope this troubleshooting guide has helped solve any issues you may be experiencing with your Ultraloq intelligent Pro u-bolt lock. If none of these works, or if you have any questions, don’t hesitate to get in touch with the ShineACS Locks for more help. We are glad to be here to help you.
More articles about keypad lock not working: