RFID Hotel door locks installation guide and video instruction

RFID Hotel door locks installation as part of your overall security plan is an excellent choice for both security and convenience. Especially in Installing electronic RFID hotel door locks for commercial application, and some residents area are significant and with convenience. It’s the high level of both worlds that make them particularly suited for some residential applications for clients who demand both.

So let’s try to talk about the hotel smart door lock installation related Precautions.

RFID Hotel door lock installation guide - RFID Hotel door locks installation guide and video instruction

The preparation of the hotel smart door lock installation

1, Confirm the hotel door lock status: Confirm that the RFID hotel door lock installation conditions meet the installation requirements. For example: Is there a power supply? Is there a particular person? Whether the renovation is completed, etc.

2, Confirm the center distance: there are two kinds of center distance: 55mm 70mm. Note: The center distance is the center distance from the door frame to the handle rotation axis.

3, Confirm the door lock thickness: door lock thickness requirements: 38mm-55mm special needs according to individual requirements. (The depth of the door lock is different. The lock cylinder, lock fixing screw length and punching requirements of the door lock are different. Please explain to the manufacturer when ordering.)

4, Confirm the left and right opening of the door lock: the door has left and right open direction, the corresponding door lock also has gone, and directly free points, when ordering should be stated, the installation should choose the same direction as the door opening door lock. Left open door lock definition: The person stands outside the door, the door opens inward, the hinge is on the left, and the door is left open. Right open door lock definition: Same as above, the strap is on the right side, and the right door is open.

preparation of the hotel smart door lock installation - RFID Hotel door locks installation guide and video instruction

Drawing the installation fixed line of the hotel door locks

1, Draw the opening line: divide the front, back, and sidelines of the door according to the opening pattern provided by the factory. (See the specific figure for the particular hole drawing)

2, Draw the front opening line of the door: Determine the installation height of the door lock. The height of the handle position is 90CM from the bottom of the door. (The old door is modified, the door is still the same.) According to the hole drawing, the line of punching is drawn.

3, Draw the opening line on the back of the door: Draw a line on the back of the door in the same way as above.

4, Draw the side opening line of the door: first, draw the center of the side of the door, and press the opening line on the bottom of the door for punching.

5, Draw the opening line of the door frame: After installing the lock core, open the opening line of the door frame according to the corresponding position of the lock core (according to the requirements of the whole drawing).

The opening of the door frame must pay attention to the height of the corresponding lock cylinder.

Digging holes for hotel smart lock installation

1, Digging the front and back holes according to the drawing hole. Note: When opening the aperture, prevent the wood fiber from generating a flash (it is best to cut the grain along the opening line with a cutter) to prevent the opening from being too large.

2, Digging the side hole by drawing the opening line. Note: The side door lock is one of the most important aspects of opening. Be careful to open the hole to prevent the fiber from flying and prevent the opening from being too large and rough. After opening the hole, check it with the lock cylinder. If it is not suitable, correct it accordingly.

3, Digging the door frame door according to the drawing hole. Note: The hole size of the door frame is required to be high, to prevent the virtual position, and the door lock is shaken. (See the post-punch diagram for details).

The hotel smart lock installation door lock

  • After opening the package, first check whether the door lock parts are complete, whether the direction is the same as the room, and use the battery to test whether the computer lock core and the circuit board are working correctly, and then start to install the door lock:
  • Install the lock cylinder: Install the lock cylinder into the door panel, and insert the connector into the inner panel. All the fixing holes meet the requirements.
  • Install the mechanical lock: Install the mechanical lock into the lock cylinder and fix it with screws to check if the mechanical key can open the door.
  • Install the front lock body: adjust the four corner turn sleeve of the lock cylinder to the correct position (the square hole and the spring are marked on the inner hole of the four-corner sleeve), and insert the front lock body into the door panel. Note: The circuit board cannot be hard-mounted, the circuit board is damaged, and the patch cord is broken.
  • After the lock body is installed: the same as the front lock body after the lock body is installed, the upper set screw. Note: Before and after installation, the lock body should be parallel to the door, and the left and right distances should not be adjusted to make the handle and the horizontal direction of the lock cylinder consistent. Adjust the up and down length to keep the handle in line with the vertical direction of the lock cylinder.
  • Install the battery box: Install the battery and the battery box in the corresponding position; connect the wire plug, and try to open it with the opening card.
  • Mounting side fixing plate: According to the installed lock core, the door frame hole is installed, and the plastic box and the side fixing plate are installed. Note: Adjustment of position.
  • Debugging and opening the door, preliminary configuration of the door lock: the door can be opened with a door open card (all kinds of opening cards) mechanical keys can open the door.

 

The above is the whole process of installing the hotel smart lock. Of course, professional matters are left to professional people to do, and hotel intelligent lock installation work is still handed over to a professional installation company to do more appropriate. And also you can install your hotel door locks with the above installation guide video instruction.

 

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *