UFO GEN IV LED high bay light which is low energy consumption has 3 wattages for option include 100W, 150 and 200W, and the light efficiency is up to 150lm/w with lumen range from 14,000lm to 28,000lm. UFO GEN IV together with 60°,90° and 100° beam angle, PC lampshade and aluminum lampshade as optional, can meet different application requirement. As of November 2018, over 200,000 pcs UFO Gen IV high bay lights have been shipped since launched with failure rate below 300 ppm which makes it the most stable LED high bay light on the market. And UFO GEN IV can be suspended with hanging chain, ceiling mounted and wall mounted with bracket, suitable for different application area.
  • Power watts: 100W, 150W, 200W
  • Light efficiency: 150lm/W, 140lm/W, 130lm/W
  • Beam angle: 60deg, 90deg,100deg
  • 5 years warranty
  • Wide range of lumen output package from 14,000lm up to 28,000lm
  • Certificates: SAA, CE, ENEC, D-Mark, TUV, RoHS



Inheriting the reliability of their predecessors, the UFO GEN IV continuously maintains high performance with low energy consumption.
150lm/W, 140lm/W, 130lm/W
100W, 150W, 200W
5d131e75d532e - test

Thermal Materials & Conduction Path

To improve the heat dissipation efficiency as much as possible, a single piece ADC12 aluminum block is formed into a heat sink with cooling fins with die casting craft. The heat is dissipated seamlessly through the base, single cooling fins and then into the air.

Further more, the LEDs arrangement is set in a sparse pattern with central area being left out as this is the part cumulating too much heat.

Higher Efficacy 150lm/W

Thanks to the effort of our engineer’s trying different combination to achieve a higher efficacy, UFO GEN VI series highbay light are designed to reach the limit of energy saving. With the well-chosen LEDs and highper formance heat sink, a 140lm/W high efficiency as standard type and 150lm/W as optional are available.

200,000 Pcs Shipments

As of December 30, 2018, over 200,000 pcs UFO Gen IV highbay lights have been shipped since lauched with failure rate below 300 ppm which makes it the most stable LED highbay light on the market.

Application Reference

5d14a2912d1d4 - test

5d14aa9930394 - test

Manufacturing Area

Manufacturing Area, a corn part of a factory, always is in high demand of quality lighting levels as precision and constant lighting level would be positive aid to improve productivity. As the matter of fact, complex sensor in response to movement or available daylight might not be the best option in this area. On the flip side, simple dimming options under different circumstances can be easily accessed via ControlPack® Touch Panel or Remote.

Recommended Products

5d14a71688709 - test


Three motion sensors (M1, M2 and M3) are installed among the luminaries in the middle part and entrance/ exit end of the manufacturing area. Any movements detected by any of those motion sensors would trigger to switch on all luminaires and maintain a full brightness for adequate illumination level. All the luminaires would only be switched off when there is no movements are detected.

Optional Lampshade

UFO Gen IV with black AL lampshade - test

UFO Gen IV with white AL lampshade - test

UFO Gen IV with PC lampshade 1 - test

Mounting Options

UFO Gen IV with Snap hook suspended - test

UFO Gen IV with bracket wall mounted 1 - test


UFO Gen IV with wireguard 1 - test

Voltage220-240 VAC
Luminous efficiency150lm/W140lm/W150lm/W140lm/W150lm/W140lm/W
Luminous [email protected]15000 lm14000 lm22500 lm21000 lm30000 lm28000 lm
Beaming Angle60deg / 90deg / 100deg
Packing1 pcs per inner box,4 inner box per outer carton
Inner box size355*355*175mm355*355*175mm395*395*200mm
Inner box G.W3.1 kg3.3 kg4.8 kg
Outer carton size740*370*390mm740*370*390mm820*410*440mm
Outer carton G.W.13.4 kg14.2 kg20.5 kg
Operating temperature range-30 C to +45 C
Driver VenderRegular / Dimmable: PHILIPS
DALI:MEANWELL (100w, 150w) / INVENTRONICS (200w)
LED VenderLuminleds
Smart control optionsOccupancy sensor / daylight sensor / 1-10V dimming / DALI
ReflectorAluminum / Polycarbonate
MaterialStructure:Die casting ADC12
Finish:Powder coated
ColorMatte black
Mounting optionsSuspended / wall mounted
IP gradeIP65
IES/LDT fileAvailable


Any more help or questions? Contact us NOW!

6 + 1 = ?

WhatsApp chat