How to Unlock a Keypad Door Lock Without The Code? Easy Guide
This guide will show you several ways about how to unlock your keypad door lock without the code when you have been locked out of your home or apartment.
A keypad door lock is a door lock that uses a keypad to unlock the door. A keypad door requires you to use a code, usually four to six or nine digits long, to open it. This prevents unauthorized persons from entering your home if they come across your keys or know how your house locks work.
The most common type of keypad used today is called “touchscreen,” meaning there are no actual buttons on this type of lock; instead, users interact with their touchscreen by tapping or swiping their finger over its surface as they would on an iPhone screen (but don’t worry – these types aren’t able to receive calls).
Touchscreens typically offer more versatility than standard mechanical locks because they can be programmed with multiple access codes and pin patterns at any time without needing any new hardware installed within the first!
There are many occasions when a person needs to unlock a keypad door lock without the code. Here are the prominent cases:
If you need to unlock a keypad door lock without the code, there are various ways. The easiest way is to call a locksmith and pay them for their services. However, this might not be necessary if your lock is not particularly expensive or complicated.
If you aren’t able to get access because you’ve lost the code and have no other means of getting inside your home or business, here are some things that may help:
Contact the manufacturer of your keypad door lock and ask for help. They will tell you what to do.
Most newer locks will allow you to use a key or an RFID key card to unlock them.
You should be able to get through on a landline phone and talk to someone who knows what they’re doing without waiting on hold.
You can factory reset to unlock your keypad lock without the code; please check this article to know more: How to Reset a Keypad Door Lock?
Take apart and reset the keypad door lock with the factory master code (or make one up).
If your safety has screws holding it together on the back side, take them out, then unscrew any additional parts until there’s nothing left except two wires connected by a small circuit board inside—this should be attached via four tiny screws around its edges; remove these too so they’re not getting in your way later when trying different methods from here onwards.
The most important way to unlock a keypad door lock without the code is by picking tools. These are usually comprised of a thin metal wire and some tension wrench. The idea here is to insert the thin wire into the keyhole until it reaches the tumblers inside, then apply pressure on each one individually until they all line up in sequence with your code number.
This may sound simple enough, but it can be challenging and time-consuming depending on how intricate your lock’s internal workings are (which will vary from one model to another). Call an expert if you feel uncomfortable doing this yourself or aren’t sure you have everything needed for this method!
You need to pick the correct spot on the cylinder, which can take some trial and error.
If you have an extra copy of your house key, use it to open your door! If not, try calling someone with access to that spare key for them to come and let you in once they arrive at your location.
It’s always best practice when leaving home for work/school/etc. It prevents losing track of time and ensures safety during emergencies like this one, where we’re locked out without our own set of keys on hand!
If you know how to do basic electronics repairs, this is the easiest way. Take apart the lock (if it has screws) and see what type of mechanism is inside it.
If an exposed cable or wire is connected directly to one side of the circuit board, then all you need to do is cut that connection and reconnect it with another wire leading into the ground (negative).
This will usually open up any deadbolt or cylinder combo since they all run on electricity which can be interrupted by simply cutting off power temporarily. At the same time, they try typing in their code repeatedly until they give up giving away its correct sequence so easily!
No need for fancy tools here! All we need now is something stiff enough not to scratch up our door handle too much but soft enough not to damage our door itself when inserted between the knob/lock mechanism – something like a good old-fashioned butter knife will work fine here, too, if nothing else handy at home!
Just slide carefully along the surface where the knob meets the casing until friction causes both pieces to move freely without sticking together!
It may be worth calling a locksmith if you don’t have the code to unlock your keypad door lock but have the key. They can open your door and give you access to your property again.
However, if you still can not unlock a keypad door lock without the code, you’d better consider changing your current home door lock; check out our TTlock smart lock to help you manage your door more safely and conveniently with your phone.
As we covered earlier, the keypad door lock is one of today’s most secure and advanced security devices. In addition to keeping your home safe, it can save you from being locked out when you forget your code. Remember these tips the next time you go on vacation to ensure no one can get in while you’re gone!
More smart keypad lock troubleshooting guide: